Motion sensor flying 1. Charge the flying helicopter for 20 minutes for optimal use 2. Hold the flying helicopter upright, make sure the propellers are parallel to your palm 3. Turn on the power switch while keeping propellers away from your face 4. Wat 3 seconds, the high-speed propellers will engage 5. Release the flying helicopter straight up 6. As the flying helicopter hovers up and down, continue to place your hand under the helicopter. No contact or remote control is required 7. Wait for the flying helicopter to hover down and become stable before holding its body, find the power switch, and turn it off 8. Recharge the flying helicopter as needed Remote control flying 1. Turn on the power switch while keeping it away from your face 2. Release the flying helicopter on the ground 3. As the flying helicopter hovers up and down, you can control the height with the Upward Flight button 4. Press the Landing button to land the helicopter 5. Recharge the flying helicopter as needed